brennenstuhl professionalLINE BSV 5 3/6 N5160 Mode D'emploi page 21

001820 proLINE Gummi-Baustromverteiler.qxp_001820 BA_proLINE Gummi-Baustromverteiler BSV 5 2
Name plate / Device label, illustration example
1 Article number
2 Type designation
3 Cable length, quality and cross section
4 Output sockets
5 Input sockets
6 Date of production
7 Rated fault current (RCD)
8 Rated voltage / nominal frequency
9 EAN code
10 Manufacturer address
11 Protection type
12 Protection class
13 CE mark
14 Mandatory self-declaration (WEEE directive)
15 Product standard
16 Rated current
ENVIRONMENTAL CONDITIONS
For a safe and failure-free operation of the device, the following environmental conditions must be observed:
– Do not install the device in an additional housing or in a building niche without consulting the manufacturer.
– Do not cover the lateral surfaces of the device.
– Do not use the device in an explosive atmosphere where flammable liquids, gases or dusts can be found –
risk of explosion and fire!
– Only use copper cables as supply cables.
EU DECLARATION OF CONFORMITY
The EU declaration of conformity is deposited at the manufacturer.
www.professionalline.com 21