Télécharger Imprimer la page

brennenstuhl professionalLINE BSV 5 3/6 N5160 Mode D'emploi page 15

Masquer les pouces Voir aussi pour professionalLINE BSV 5 3/6 N5160:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
001820 proLINE Gummi-Baustromverteiler.qxp_001820 BA_proLINE Gummi-Baustromverteiler BSV 5
DANGER
Working at live parts may cause severe injuries or death.
All-current sensitive residual current circuit breaker (FI) (type B)
The unit types BSV 5 2 3/6 N5160 and BSV 5 2 3/6 N560 are equipped with a residual current circuit
breaker (FI/RCD) "Type B" and are therefore only intended for certain applications.
WARNING
The following instructions must be observed to ensure safe use!
The units concerned are marked accordingly with a sticker:
- Building current distributors with universal current-sensitive residual current circuit breakers must not be
operated behind pulse current-sensitive residual current circuit breakers (with RCD type A).
When used, a residual current circuit breaker (FI/RCD) type B must always be connected upstream.
Electrical equipment or consumers (e.g. welding equipment, pumps, vibrating machines, etc.) that are
controlled via a frequency converter can generate smooth DC residual currents.
Commercially available residual current circuit breakers with the tripping characteristic AC or of type A
cannot detect these residual currents, so that proper tripping of the RCD is not guaranteed and the risk of
electric shock increases in the event of a fault.
Contact a qualified electrician.
- Before using the unit, have the electrical installation checked by a qualified electrician to ensure that you
can operate the unit or the loads to be connected.
- After a residual current circuit breaker has tripped, all circuit breakers in the circuit of the electrical system,
including those of the supply point used, must be tested for function and effectiveness by a qualified
electrician. Please observe the country-specific regulations.
Check the connection of the sockets
– Supply the distribution box with power via the connection cable.
– Open the housing cover, fig. B (9).
– Activate the protective equipment, fig. B (5).
www.professionalline.com
2
15

Publicité

loading

Ce manuel est également adapté pour:

Professionalline bsv 5 3/6 n560Professionalline bsv 5 2 3/6 n5160Professionalline bsv 5 2 3/6 n560Professionalline h07rn-f 5g6,0