brennenstuhl professionalLINE BSV 5 3/6 N5160 Mode D'emploi page 14

001820 proLINE Gummi-Baustromverteiler.qxp_001820 BA_proLINE Gummi-Baustromverteiler BSV 5
PACKAGING AND TRANSPORT
Packaging
Packaging material is valuable raw material and can be reused. This is why packaging material should
be recycled. If this is not possible, dispose of the packaging material according to the applicable local
regulations.
Transport
Check your delivery for completeness and damages. If you notice any transport damage or if the delivery is
incomplete, please notify your retailer immediately.
STRUCTURE OF THE DISTRIBUTION BOX
Fig. A, ex. Distribution box BSV 5 3/6 N560
1 Bottom of housing
2 Top of housing
3 Handle
4 Residual current device
COMMISSIONING
The activities described in this chapter may only be performed by a qualified electrician!
The device is only intended for a stable position on all four feet. The proper operating position is with
the hinged lids of the sockets opening upwards.
WARNING
Connecting the device to a supply cable with insufficient line cross-section and/or an insufficient
upstream fuse could result in a fire which may cause injuries or lead to an overload which can
damage the device. Please observe the information on the name plate!
14 www.brennenstuhl.com
5 Protective equipment
6 Connection cable
7 CEE socket
8 Schuko socket
Fig. B, ex. Distribution box BSV 5 3/6 N560
9 Self-closing housing cover
10 Connection plug
11 Anti-slip rubber feet
12 Quick closure
2