Explanation Of The Symbols; Additional Safety Instructions For; Nexxsaw; Safety Instructions For Chain Saws - Batavia BT-NXS002 Mode D'emploi

Masquer les pouces Voir aussi pour BT-NXS002:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
Dear customer
Please familiarize yourself with the proper
usage of the device by reading and following
each chapter of this manual, in the order
presented. Keep these operating instruc-
tions for further reference.
Please read the enclosed "General safety
instructions for power tools" and all
additional safety instructions in this
operating instructions!
This manual contains important information
on operating and handling the device. Keep
these operating instructions for further
reference. Please pass it on along with the
unit if it is handed over to a third party.
Battery and charger not included!
The battery is available separately under
art. No: 7062517 (2 Ah), 7062518 (4 Ah) or
7063735 (5 Ah). The charger is available
separately under art. No: 7063688 (2.4 A) or
7063554 (4 A).
These items are available online and in par-
ticipating stores.

1. Explanation of the symbols

The following symbols are used in the user
manual or on the product:
Warning! To reduce the risk of
injury, the user must read the
instruction manual.
Denotes risk of personal injury, loss
of life or damage to the tool in case
of non-observance of the instruc-
tions in this manual.
Always wear hearing protection.
The effects of noise can cause
hearing loss.
Wear safety glasses. When working
with electric power tools, sparks,
splinters, chips and dust particles
may be generated and these can
cause loss of sight.
Wear protective headgear.
Wear safety gloves.
Wear sturdy shoes.
4
Do not expose to rain or water.
Beware of kick-back.
Keep sufficient distance to electri-
cal power lines.
CE stands for "Conformité
Européenne", which means "In
accordance with EU Regulations".
With the CE marking, the manufac-
turer confirms that this Electric tool
complies with the applicable Euro-
pean directives.
Do not dispose of electric power
tools with domestic refuse.

2. Additional safety instructions for

Nexxsaw

a. The Nexxsaw is designed for cutting
branches. Only use the Nexxsaw as
indicated in this manual for cutting
wood. The machine has not been
designed for continuous, professional
use.
b. Keep the Nexxsaw out of reach of chil-
dren. It is not a toy.
c.
Persons with limited physical, sensorial
or mental abilities are not allowed to
use the Nexxsaw, unless they are super-
vised for their safety by a qualified per-
son or are briefed by the responsible
person how to use the machine.
d. Children and adolescents are not
allowed to use the Nexxsaw. Excluded
from this prohibition are young people
over 16 years of age under the supervi-
sion of an expert for the purpose of
training.
e.
Please note the warning symbols. They
mark all those instructions which are
important for safety reasons. Observe
these instructions as failure to do so
could result in serious injury!
f.
The Nexxsaw must be used only by one
person at a time. Make sure bystanders
do not stay in the vicinity of the Nexx-
saw's work area.
g. Check the safe operating condition of
the Nexxsaw, in particular the guide bar
and the saw chain, before each
operation.
h. Always have a safe stand when working
with the saw.
i.
Hold the machine firmly and securely
when switching on.
j.
Make sure the guide bar and the saw
chain must be free when switched on
and must not come into contact with
the workpiece to be cut.
k.
Keep your hands away from the sawing
area. Do not reach under the workpiece.
Contact with the saw chain may result
in injury.
l.
Guide the Nexxsaw onto the workpiece
only when switched on. Otherwise there
is a risk of kick-back if the saw chain
gets caught in the workpiece.
m. When sawing, the base plate must
always face against the workpiece. The
saw chain can become jammed and
lead to loss of control over the machine.
n. When the cut is completed, switch off
the machine and then pull the saw
chain out of the cut only after it has
come to a standstill. This way you can
avoid kick-back.
o. Clamp the material to be processed
well. Do not support the workpiece with
your hand or foot. Do not touch objects
or the floor with the saw running. Dan-
ger of kick-back.
p. When sawing converted timber and thin
branches always use a strong support,
such as a sawing trestle. Do not stack
timber pieces.
q. Before cutting logs, secure the logs in
position.
r.
When working on sloping ground, make
sure to work facing upwards.
s.
Be particularly careful when cutting
splintered wood. Splinters of wood can
be torn along by the saw chain and
increase the risk of injury!
t.
Foreign objects such as nails, screws,
metal parts, sand, etc. lead to increased
wear on the guide bar and saw chain.
English
u. A blunt saw chain can cause overheat-
ing and damage to the motor.
v.
Always pull out the battery when check-
ing the chain tension, to re-tighten it, to
mount the saw chain and to eliminate
faults! Also remove the battery if you do
not use the machine temporarily.
3. Safety instructions for chain
saws
a. Keep all parts of the body away from
the saw chain when the saw is operat-
ing. Before you start the saw, make
sure the saw chain is not contacting
anything. A moment of inattention
while operating the saw may cause
entanglement of your clothing or body
with the saw chain.
b. Hold the saw by insulated gripping
surfaces only, because the saw chain
may contact hidden wiring. Saw chains
contacting a "live" wire may make
exposed metal parts of the saw "live"
and could give the operator an electric
shock.
c. Wear eye protection Further protective
equipment for hearing, head, hands,
legs and feet is recommended. Ade-
quate protective equipment will reduce
personal injury from flying debris or
accidental contact with the saw chain.
d. Always keep proper footing and oper-
ate the saw only when standing on
fixed, secure and level surface. Slip-
pery or unstable surfaces may cause a
loss of balance or control of the saw.
e. When cutting a limb that is under ten-
sion, be alert for spring back. When
the tension in the wood fibres is
released, the spring-loaded limb may
strike the operator and/or throw the
saw out of control.
f.
Use extreme caution when cutting
brush and saplings. The slender mate-
rial may catch the saw chain and be
whipped toward you or pull you off
balance.
g. Carry the saw by the handle with the
saw switched off and away from your
body. When transporting or storing the
saw, always fit the guide bar cover.
5

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

7063825

Table des Matières