Control Panel And Description Of Functions - Noaton AE 6160 Mode D'emploi

4.2 Control panel and description of functions

MODE
By pressing the "MODE" pushbutton you can cycle between NORMAL or NATURAL mode. At
the same time the respective icon on the panel will light up:
NORMAL – the appliance will maintain a constant rate of air flow
NATURAL – after a few seconds the appliance will randomly change the fan speed, including
pauses, to induce the feeling of natural wind.
SPEED
By pressing the SPEED pushbutton you can cycle through the fan speeds: Low – Medium -
High
SWING
Once this pushbutton is pressed, the vertical vanes will start turning from one side to the
other. If this pushbutton is pressed once again, the vanes will be stopped at their given
position.
COOL / HUM
By pressing the pushbutton with a snowflake symbol, cooling combined with air
humidification will start. For more information, please refer to section 7.1.
TIMER
By pressing this pushbutton with the appliance in operation, you will set the time required
until the appliance automatically switches itself off, i.e. in the range of 1-12 hours and at
increments of 1 hour.
36