Attaching The Control Unit - Canon Macro Ring Lite MR-14EX Mode D'emploi

Using AA/R6 batteries other than the alkaline type (LR6) may cause
improper battery contact due to the irregular shape of the battery
contacts.
AA/HR6 Ni-MH batteries can also be used.

Attaching the Control Unit

Loosen the locking ring.
1
Turn the locking ring as shown by the
arrow to loosen it.
Attach the control unit.
2
Slip the control unit's mounting foot
into the camera's hot shoe all the
way.
Tighten the locking ring.
3
Turn the locking ring as shown by the
arrow. The locking pin will then
protrude from the mounting foot.
To detach the control unit, loosen the
locking ring until the locking pin
retracts, then detach the control unit.
11