Audible Signals - ZANKER ZKVS1530 Notice D'utilisation

End of programme
Salt

Audible signals

Audible signals have been introduced to help
indicate which operations the dishwasher is
performing.
– end of the washing programme,
– malfunction of the appliance
Factory setting: audible signals activated.
It is possible to deactivate the audible signals,
using the Programme selection/RESET but-
ton.
Deactivation/activation of the audible sig-
nals
1. Press the On/Off button. The appliance
must be in setting mode.
2. Press and hold Programme selection/
RESET button until programme light A
flashes and programme light B illuminates
with fixed light.
3. Press Programme selection/RESET but-
ton again: programme light A becomes
fixed and programme light B starts flashing.
Indicator lights
Illuminates when the washing programme has ended.
It also has added functions of visual signalling as:
– the setting of the water softener,
– deactivation/activation of the audible signals,
– intervention of an alarm due to the malfunction of
the machine.
Illuminates when the special salt has run out.
Is never illuminated while a washing programme is
running.
4. After a few seconds:
– programme light A turns off
– programme light B goes on flashing
– End of programme light illuminates
with fixed light, indicating that the audi-
ble signals are active.
5. To deactivate the audible signals press
again the Programme selection/RESET
button: the End of programme light turns
off indicating that the audible signals have
been deactivated.
6. To memorise the operation, switch off the
dishwasher.
7. To activate again the audible signals, sim-
ply follow the above operations until the
End of programme indicator light illumi-
nates.
79