SQuape Seven BF RDA Manuel D'utilisation page 15

5.3 Refi lling the SQuape S[even] - BF Mode
The SQuape S[even] is delivered directly in
bottom feeder (squonk) mode. Screw the
atomiser onto a suitable bottom feeder de-
vice with integrated bottle. Fill the bottle and
press the bottle side after installation. The
liquid is pressed upwards through a passa-
ge and reaches the cotton in the evaporator
chamber. Attention: The bottles each have a
different pressure point. Remove the mouth-
piece of the SQuape S[even] and observe the
liquid flow rate from the liquid to the evapo-
rator chamber at the beginning. This gives
you a feeling of how much pressure you have
to exert on the bottle to achieve a suitable
moistening of the cotton.
> >
> >
5.4 Refi lling the SQuape S[even] - Drip-
per Mode
The SQuape S[even] comes with a screw
plug for the liquid supply in bottom feeder
mode. Mount the screw plug into the bot-
tom feeder port from above (deck). Now the
evaporator chamber is sealed and the SQua-
pe S[even] can be used as a dripper. We
recommend to remove the mouthpiece for
the liquid addition or to use a mouthpiece
with a large inner diameter. This allows you
to drizzle the desired amount of liquid onto
the cotton from above.
15