Sigma ROX 12.0 SPORT Mode D'emploi page 12

INSTALLATION OF BUTLER
ANT+ SENSOR PAIRING
To use the sensors (ANT+), these must be paired with the ROX 12.0. To
carry out the pairing, select the menu item SETTINGS ► CONNECT SENSOR.
There are several options to pair the sensors:
− With SELECT SENSOR,
− With SEARCH ALL,
− Enter the sensor ID,
Always make sure before you start the search that only the sensors that are
to be paired are activated. Start the search using SEARCH ALL or SEARCH
SENSOR ► desired sensor type. After a few seconds, the sensor and the
associated sensor ID are displayed. Select the desired sensor to connect.
The sensors that are paired can be found under CONNECTED SENSORS.
This product is ANT+ certified and meets ANT+ specifications.
www.thisisant.com/directory
12
GMA-SPORT-BA-ROX-12-SPORT-RZ.indd 12
CLICK!
2 mm
you can search for a certain type of sensor.
you can search for all the sensors in the area.
if it is known.
1
2
ACTION CAM
not included
2 mm
3 mm
05.03.2018 16:40:43