AGU Baby Bubbly AGU EC6 Mode D'emploi page 68

3
The water in the kettle will boil, and then it will be maintained at a set
temperature. The temperature is shown on the display.
4
Switch off the device after use.
DELAYED START FUNCTION (TIME SET)
The delayed start function can be used for two programs: water heating for
milk formula and warming up baby food. The function allows to delay the
start of the device at a later time. The maximum delay time is 24 hours.
1 Set the program using the program selection button (
will light up above the selected program. The indicator will also light up
above the program of water heating for milk formula. If you press the
program selection button again, the indicator above the warming up baby
food program will light up.
2
After selecting the program (water heating for milk formula or warming up
baby food), the time indicators (
settings (
you can change it with the
setting indicator
3 The device automatically switches to the energy-saving mode.
4
When the start delay time expires, the device will automatically turn on
and start the selected program by the parameters specified earlier.
5
Switch off the device after use.
68
) will light on the display. The preset time is 60 minutes,
switches to the operation indicator ( ).
), the temperature ( ) and the program
buttons. After three seconds, the program
). The indicator