AGU Baby Bubbly AGU EC6 Mode D'emploi page 61

DEVICE OPERATION
1
Plug the power cord into a grounded electrical outlet, press the
to turn the device on. If you do not set the program, the device will auto-
matically turn off after 10 seconds.
2 Set the program using the program selection button
will light up above the selected program. Set the time or temperature
using the
MODE 1
WATER HEATING FOR PREPARATION OF MILK FORMULA (MILK MOD)
MODE DESCRIPTION: the kettle will boil water, and then it will maintain
the temperature at the set level.
1 Fill the kettle with drinking water and close it with the jar cover. Do not pour
more than 1000 ml of water.
2
Set the program using the program selection button
will light up above the selected program. The temperature indicators ( )
and program settings (
seconds, the program setting indicator (
indicator ( ). Preset temperature is 40°C, it can be changed with
the
temperature in the kettle can not be lower than the ambient temperature.
3
The water in the kettle will boil, and then it will be maintained at the set
temperature. The temperature is shown on the display.
4 Switch off the device after use.
EN
buttons.
) will light up on the display. After three
buttons in the range of 1-100 °C. Please note that the water
. The indicator
. The indicator
) switches to the operation
button
61