Preparation For Work - AGU Baby Bubbly AGU EC6 Mode D'emploi

8

PREPARATION FOR WORK

Read this manual carefully before use. Save it for future reference.
Get the device and its accessories out of the box; remove all packing mate-
rials, promotional stickers and labels.
ATTENTION
Packaging material (film, foam, etc.) can be dangerous for children. The
danger of suffocation! Keep the packaging out of the reach of children.
Carefully wash the jar cover, kettle, sterilization containers and steam-
ing with hot water. Do not use abrasive and aggressive agents. Wipe the
device inside and outside with a damp cloth. Do not wash the jar cover,
kettle, sterilization containers and steaming in a dishwasher.
Fill the kettle with the required amount of water, not exceeding the mark
«Max». Close the kettle tightly.
Place the kettle on the bottom base (stand). Connect the device to the mains.
Boil the kettle twice before first use.
ATTENTION: The electric kettle is intended only for water heating. Do not
pour other liquids or substances into the device.
After completing the above, your kettle is ready for use.
INSTRUCTIONS FOR CLEANING AND DISINFECTING THE DEVICE:
Do not use chemically active detergents to clean the device.
1 Unplug the kettle from the AC outlet before cleaning.
2 Clean the base of the kettle with a soft, damp cloth.
3
The glass bus of the kettle may be cleaned with a soap solution.
4
Rinse the glass bus of the kettle to remove any remaining soap solution.
5
Leave the device to dry in the air at room temperature.
6 Keep the device in a dry, clean and dust-free space according to the
conditions in the section «Rules for storage, transportation and operation
of the device».
EN
59