AGU Baby Bubbly AGU EC6 Mode D'emploi page 67

3
Set the program using the program selector button
light up above the selected program.
4 The time indicators (
on the display. After three seconds, the program setting indicator (
switches to the operation indicator ( ). The preset time is 20 minutes,
you can change it with the
5
The operating time is shown on the display.
6
When the preparation is completed, a beep sounds.
7 Switch off the device after use.
During cooking, watch the foaming. If necessary, remove the foam with
a spoon.
MODE 5
WATER HEATING (TEA MAKER)
MODE DESCRIPTION: water in the kettle will boil, and then the water
temperature will be maintained at a set level.
1 Fill the kettle with drinking water and cover with lid (1). Do not pour more
than 1000 ml of water.
2
Set the program using the program selector button (
will light up above the selected program. The temperature indicators ( )
and program settings (
seconds, the program setting indicator (
indicator ( ). The preset temperature is 90 °C, it can be changed with
the
EN
) and program settings (
) will light up on the display. After three
buttons.
buttons.
) switches to the operation
. The indicator will
) will light up
)
). The indicator
67