AGU Baby Bubbly AGU EC6 Mode D'emploi page 63

3
Set the program using the program selection button
will light up above the selected program.
4
The temperature indicators ( ) and program settings (
on the display. After three seconds, the program setting indicator (
switches to the operation indicator ( ). Preset temperature is 37°C, it can
be changed with the
5
The water temperature is shown on the display.
Note: the milk heating time depends on the amount and initial tempera-
ture of the milk, as well as on the type of bottle used.
Always check the temperature of baby food before feeding the baby!
Gently shake the bottle and check the milk temperature dropping a few
drops on the wrist.
When overheating milk can lose vitamins and nutrients.
6
Switch off the device after use.
EN
buttons.
. The indicator
) will light up
)
63