Kerbl 1085 Guide D'utilisation page 24

Introduction
EN
Congratulations to the purchase of the Stable- and TrailerCam. This camera-system is designed for perfect animal
monitoring during birth or to supervise your barn.
The products operates on the 2,4 GHz frequency and has a standard range of 100 meters at a clear line of sight.
Due to the directional antennas the range will increase to 1200 meters at a clear line of sight without increasing the
transmitting power of the camera. The camera, AVLink and the LCD-monitor is compatible with all 2,4 GHz equipment.
Please be aware that we use an open frequency and that the signal is not encrypted. This means that the signal can be
captured by another 2,4GHz device within the camera range.
The product is CE- and FCC certified which means that it fulfils all established rules and demands for usage within the
EU and USA. For further information please have a look at the declaration of conformity.
Please consider also the following important informations:
• Before using the stable- and trailer camera-system please read carefully the instruction manual.
• Check carefully the cables and the connectivity to the devices. Products will be damaged by wrong voltage supply.
There will be no warranty for such breaks.
• The LCD-Monitor is not waterproof – only for indoor
• Never open the housing of any device – please return broken devices to your dealer
• Don´t watch videos while drinving – respect the national law.
• Don´t use aggressive chemicals in order to clean your devices
• Do not use the products in sensible places like hospitals or airplanes since they might interfere with sensitive
equipment.
• Respect the rights of third parties .
• Follow the laws and legislations that apply in your country.
• Do not leave packaging material near children to avoid the risk of suffocation.
• Do not cover or place the power adaptors on heat sensitive materials.
• Do not lift the camera or the AVLink using their antennas.
• If you use several cameras within the same area, place the cameras in a way that allows the signals to reach the
receiver from different angles and not too close to each other.
• Do not use several cameras with the same frequency within the same area since they will interfere with each other.
We resign all responsibility that might occur from abuse or incorrect usage of the products. Always follow the instruc-
tions in this User Guide.
CE Mark / CE Declaration of Conformity
Albert Kerbl GmbH hereby declares that the Stable Cameras #1085, 1086 and #1087 comply
with the 2014/53/EU Directive. The full text of the EU Declaration of Conformity can be found
on the following website: http://www.kerbl.com/doc
24