Setup; Setup Location Requirements - Caso Germany SlimLine 3400 Mode D'emploi Original

13.5 Setup

13.5.1

Setup location requirements:

caso SlimLine 3400
In order to ensure the safe and trouble-free operation of the
device, the setup location must fulfil the following prerequisites:
 The appliance must be positioned on a solid, even, horizontal
and heat-resistant base with sufficient load-supporting capacity
for the appliance itself plus the heaviest anticipated cooking
contents.
 The induction cooktop must not be operated on a base with an
iron or steel content, as this can heat up considerably.
 Select an installation location where children cannot reach the
appliance‟s hot surface.
 The appliance is not intended as a built-in appliance.
 Do not set up the device in a hot, wet or extremely damp
environment or near flammable material.

Do not set up the induction cooktop in the vicinity of appliance
and objects which react sensitively to magnetic fields (e.g.:
Radios, televisions, cassette recorders, etc.).
 To operate correctly, the appliance requires a sufficient flow of
air. Leave a 10 cm gap on all sides when setting up the
appliance.
 The cool air is drawn in by the underside of the appliance. Do
not cover or block any of the appliance‟s openings.
 The electrical socket must be easily accessible so that the
power lead can be disconnected easily, in the case of an
emergency.
 The installation and assembly of this device in non-stationary
setup locations (e.g. on ships) must be carried out by specialist
companies / electricians, provided they guarantee the
prerequisites for the safe use of this device.
Commissioning
49