13.2 Delivery scope and transport inspection
• As a rule, the PRO 3500 is delivered with the following components:
• Induction cooktop PRO 3500
• Operating Instructions
► Examine the shipment for its completeness and for any visible damages.
► Immediately notify the carrier, the insurance and the supplier about any incomplete
shipment or damages as a result of inadequate packaging or due to transportation.
13.3 Unpacking
To unpack the device, remove the device out of the carton and remove the
packaging material.
13.4 Disposal of the packaging
The packaging protects the device against damages during transit. The packaging
materials are selected in accordance with environmentally compatible and recycling-
related points of view and can therefore be recycled.
Returning the packaging back to the material loop saves raw materials and reduces
the quantities of accumulated waste. Take any packaging materials that are no
longer required to "Green Dot" recycling collection points for disposal.
► If possible, keep the original packaging for the device for the duration of the
guarantee period of the device, in order that the device can be re-packaged
properly in the event of a guarantee claim.
13.5 Setup
13.5.1
In order to ensure the safe and trouble-free operation of the device, the setup
location must fulfil the following prerequisites:
• The appliance must be positioned on a solid, even, horizontal and heat-resistant
base with sufficient load-supporting capacity for the appliance itself plus the heaviest
anticipated cooking contents.
• The induction cooktop must not be operated on a base with an iron or steel content,
as this can heat up considerably.
• Select an installation location where children cannot reach the appliance's hot
surface.
• The appliance is not intended as a built-in appliance.
• Do not set up the device in a hot, wet or extremely damp environment or near
flammable material.
caso Pro 3500
Heruntergeladen von
manualslib.de
Setup location requirements:
Handbücher-Suchmachiene
Please note
Please note
38