Reliable Digital Velocity V100 Guide D'utilisation page 11

Masquer les pouces Voir aussi pour Digital Velocity V100:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

STEAM SELECTION
The Compact Vapor Generator has two steam positions, medium steam (15 gr/min)
and maximum steam (30 gr/min). The medium value always appears by default
when the iron is switched on.
To obtain maximum steam, simply press the steam selector button once Fig 2 (i),
and the steam icon will appear in the display at its highest flow Fig 5. To revert to
medium flow, you just have to press the selector button again. Fig 2 (i).
When you have chosen the appropriate temperature and steam flow for the garment,
press the steam On/Off switch Fig 6 (g) once and you may start to iron. It is
not necessary to be pushing the steam button continually, just press once and the
steam will issue without interruption. To cut off steam output, press the steam
On/Off switch Fig 2 (g) again and it will cease to steam automatically.
ECO - INTELLIGENT™
stopping the iron from producing steam after 3 seconds of not detecting any
movement. This ensures lower power consumption as well as a reduction in
the use of water, and the need to refill the iron.
The steam function switches back on automatically when the slightest movement
of the iron is detected or when any of the steam outlet buttons are pressed.
If you require continuous steam with little or no movement of the iron, hold the
steam button down and release when finished.
AUTOMATIC SHUT OFF: AUTO-PAUSE
The Digital Velocity V100 has an automatic shut-off system. It is shut-off auto-
matically eight minutes after the last time it was used. This means that once the
moment a buzzer will sound and the icon Fig 2 (f) will appear (blinking) for five
seconds on the illuminated display. It will continue blinking afterwards on
the display, even though the display is not lit up, indicating that the iron has been
switched off. To switch it back on, just move it slightly (vertically) or else press
any of the three control buttons Fig 2 (g, h, i). The iron will revert to the tempera-
period between being switched off and switched back on again will affect the time
that the iron may need to regain the temperature selected previously.
STEAM READY™ FEATURE
For those who want to leave their iron on for periods longer than 8 minutes at a
time (without the automatic shut off system activating) the Digital Velocity V100 has
07

Publicité

Table des Matières
loading

Table des Matières