Belt And Brush Roll Replacement - Rubbermaid UL12 Instructions D'utilisation Et D'entretien

Cloth Bag Replacement
(cont.)
5
E
O
Pull cloth bag off of carry handle and lower handle tube.
Remove old cloth bag from unit.
7
Align screw holes on dirt tube with holes on cloth bag plate.
Reinstall screws to secure dirt tube to cloth bag plate.
9
T
Insert paper bag into cloth bag, making sure paper bag is
fully extended.
6
E
O
Using NEW cloth bag, line up tabs and screw holes on cloth
bag plate with corresponding slots and holes on carry handle.
8
O
Snap cloth bag clip back onto lower handle tube.
10
T
Push paper bag collar onto dirt tube over lock tabs.
12
Cloth Bag Replacement
(cont.)
11
2
1
E
Close and zip cloth bag.

Belt and Brush Roll Replacement

1 Tool needed
Unplug before servicing.
3
Press tab below left wheel and lift nozzle guard. Pull nozzle
guard up from base.
ENGLISH
2
Turn vacuum cleaner over. With base lying flat and the
bottom facing up, remove both screws near rollers.
4
Lift brush roll out of nozzle opening. After removal,
slide belt off of pulley.
13