BabyGo Universal Mode D'emploi page 23

4.5 Adjust the headrest height
4.6 Changing the shoulder strap height
Step 1: Remove the shoulder straps from the harness connector according
the picture(1), (2), (3) above and remove the shoulder strap cap, then you
can adjust the shoulder straps.
Step 2: From the front of the seat, pull it through the slot in the seat's back-
rest and fabric cover. Thread the harness strap back through the next hole
up or down on the seat's backrest.
Step 3: Re-thread the harness strap back onto the harness connector at the
back of the seat.
Step 4: Repeat the same process for the other harness strap. Make sure
both ofthe straps go through slots at the same height.
The headrest can be adjusted for 5 positions
to fit for different height of children. As the
picture shows, lift the red handle up, mean-
while adjust the headrest up and down to
change the height.
lmportant: Check to make sure the headrest is
securely locked in the desired position by pul-
ling or pressing it.
Car Seat + Isofix
23