Bartscher 100080 Mode D'emploi page 6

The thermo transport container is intended for transporting cold and warm liquids
and food products.
Tips for the user
•
Unpack the thermo transport container and remove all packing material.
•
Loosen the latches and remove the lid from the container.
•
Wash the container and lid with silicon seal in warm water and with a mild cleaning
agent before and after use.
•
Rinse in clean water and leave to dry, or wipe dry with a soft cloth.
•
Use only soft cloths and never use any abrasive cleaners that could scratch the
surface.
•
Use commercially available stainless steel cleaning agents for cleaning the exterior of
the transport container.
•
Fill the clean thermo transport container with a desired hot/cold liquid or food product
(maximum 20 litres), cover with the lid and secure using the latches. These ensure
safe transport of the container's contents.
•
The transport container's double walls
ensure proper isolation. Heat loss
amounts to approx. 6
•
Open the container and pour out the
desired amount of liquid or take out the
desired amount of food as needed. To
empty the thermo transport container,
use the handle and side swinging handle
(see diagram at right).
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
- 4 -
°
C per hour.
phone: +49 (0) 5258 971-0
fax: +49 (0) 5258 971-120