Maximum/Minimum Function - TFA THERMO-LIGHT 30.3035 Mode D'emploi

TFA_30.3035_Anleitung 03.03.2008
THERMO-LIGHT
– Wireless thermometer

4.3.2 Maximum/Minimum function

• Press "MEM" button to show the maximum values
and remote channels. Press "MEM" button again to show minimum values
• Hold "MEM" button for 2 seconds while the maximum or minimum values are
displayed to clear the recorded maximum and minimum readings.
4.4. Light and display colour
4.4.1 Selection of illumination
• Slide the "Manual / Mood / Alert" switch on the backside to choose the light:
1. Position "Manual": You can activate the light and backlight function for
10 sec. by pressing the top of the instrument.
2. Position "Mood": Light colour changes at random, display colour changes
according to temperature (in continuous operation, with power adapter
only).
3. Position "Alert": Light and display colour changes according to temperature
(in continuous operation, with power adapter only).
4.4.2 Selection of indoor or outdoor temperature
• Hold "ALERT" button for 2 seconds. "IN" or channel "1" is flashing in the
middle of the display. You can select your desired setting by pressing " " or
" " buttons.
1. Indoor temperature (IN)
Indoor temperature
Light
Backlight
2. Outdoor temperature (channel 1)
Temperature (channel 1)
Light
Backlight
• If the backlight flashes, the connection to channel 1 remote sensor is inter-
rupted.
5. Outdoor thermo sensor
• Press "°C/°F" button on the Thermo Sensor unit to change the temperature
unit on the sensor display from °C to °F.
• Use a pin to press the "RESET" button on the remote sensor to transmit tempe-
rature to the display unit manually (e.g. for testing or in case of loss of trans-
mitter signal).
• After successful installation close the cover of the battery compartment and
replace the protection cover by pushing outwards the two latches in the
bottom.
5.1 Additional transmitters
• The sensor will automatically transmit temperature to the display unit on
channel 1 after batteries are inserted.
12
16:02 Uhr Seite 7
of indoor temperature
+ 25.0 °C 20.0°...24.9°C
77.0°F 68.0°...76.8°F
red purple
red purple
+ 25.0 °C 15.0°...24.9°C 5.0°...14.9°C
77.0°F 59.0°...76.8°F 41.0°...58.8°F
red orange purple
red orange purple
THERMO-LIGHT
• For having more than one external transmitter, select a different channel (1 to
3) for every transmitter by pressing the "CH" button on the transmitter while
the channel number is flashing. Press and hold the "CH" button on the display
.
unit for 2 sec. to start initialization manually.
play unit and the new transmitter will be received automatically.
6. Positioning of display unit and transmitter
• Choose a shady and dry position for the transmitter. (Direct sunshine falsifies
the measurement and continuous humidity strains the electronic components
needlessly)
• Place the display unit at the final position. Avoid the vicinity of any interfering
field like computer monitors or TV sets and solid metal objects.
• Check the transmission of the signal from the transmitter to the display unit
(transmission range 30 m free field, within ferro-concrete rooms, especially
with metal parts, the received signal is naturally weakened.
• If necessary chose another position for transmitter and/or display unit.
• Use the bracket stand for mounting or standing when the signal is received
successfully.
7. Battery replacement
• When the batteries of the main unit are used up, the low battery icon appears
in the middle of the display. When the batteries of the transmitter are used
- 19.9°C
up, the low battery icon
67.8°F
• Use alkaline batteries only. Observe correct polarity. Low batteries should be
changed soon to avoid the damage resulting from a leaking battery. Batteries
blue
contain harmful acids. Wear protective glasses and gloves when handling with
blue
leaked batteries.
• Attention: Please do not dispose of old electronic devices and used batteries in
household waste. To protect the environment, take them to your retail store
- 4.9°C
or to nearest civic amenity site to be disposed of according to national or local
regulations.
40.8°F
blue
8. Instructions
blue
• Always read the users manual carefully before operating the unit.
• Use a pin to press the "RESET" button in the battery compartment if the unit
does not work properly.
• Avoid placing the instrument near interference sources/metal frames such as
computer or TV sets.
• Do not expose the instrument to extreme temperatures, vibration or shock.
9. Liability disclaimer
• The product is not a toy. Keep it out of reach of children.
• The product is not to be used for medical purpose or for public information,
but is determined for home use only.
• The specifications of this product may change without prior notice.
• No part of this manual may be reproduced without written consent of TFA
Dostmann.
• Improper use or unauthorized opening of housing will mean the loss of
warranty.
– Wireless thermometer
flashes on the LCD of the dis-
appears on the top of the display.
13