KREAFUNK toCHARGE Manuel D'utilisation page 6

2. General Operation
Methods
2.1 Charging the power bank:
Please recharge your power bank
on your computer via the USB port
or with a USB compatible wall
charger (output 5V 1A). For the
models with LED indicator that can
show the remaining capacity, the
details are as follows:
Indicator
1 LED flashes
1 LED on and 1
LED flashes
2 LED on and 1
LED flashes
3 LED on and 1
LED flashes
4 LED on and 1
LED flashes
6
Capacity
<5-10%
25%
50%
75%
100%
English
2.2
Select a 5V USB charger or a com-
patible charger (not provided in
the box) and cable to connect your
power bank and digital device. The
toCHARGE power bank will charge
the device automatically when the
device is connected, if not, press
the button to start charging. The
LED light that indicates the capac-
ity left in the power bank will flash
when charging.
2.3
The toCHARGE power bank will
be shut off automatically after
10 seconds, when charging is
finished.
2.4
The LED light that indicates the
capacity left in the power bank
will shut off automatically after 6