Settings; Maintenance + Cleaning; Disposal; Warranty - Pentatech VT 34 Consignes D'utilisation Et De Sécurité

Activation of the monitor from the indoor station
!
Press the Monitor button [30] in order to see the camera image on the
monitor. The image will be extinguished when the Monitor button is
pressed again or automatically after approx. 60 seconds.
Alarm function
An alarm sound can be activated through the loudspeaker of the outdoor
station by pressing the alarm button [31]. This can be useful for
summoning help or for deterring unwanted callers.

Settings

!
Adjust the BRIGHTNESS switch [35] to change the monitor brightness
(2 settings)
!
Adjust the CONTRAST switch [34] to change the monitor contrast
(2 settings)
!
Adjust the VOLUME switch [33] to change the volume of the ringing tone
(2 settings)

Maintenance + cleaning

!
The unit is maintenance-free.
!
Regularly check the technical safety and functioning
!
Before you clean the device, pull the mains adapter out of the mains
socket. Use a dry cloth for cleaning the surfaces. For stubborn dirt, clean
the surfaces with a soft, fluff-free, slightly moist cloth without cleaning
additives.
!
Carefully clean the slits of the loudspeaker [23] with a dry brush.

Disposal

Packaging material, used batteries or electrical products must not be
disposed of as household waste. Use your recycling system. Details are
available from your local authority.

Warranty

This product is warranted for 2 years from the date of purchase. Keep the till
receipt in a safe place as proof of purchase. The warranty only covers material
or manufacturing defects. It does not cover wear or damage to fragile parts.
The product is only intended for private use and not for commercial use. The
warranty is void in the case of misuse and/or improper handling, application
of force and for any unauthorized repairs. This warranty does not affect your
legal rights.
Cause
The power supply is interrupted
The connection between the outdoor station and the
indoor station has been interrupted
The cable is too long or its cross section is too small
It is produced by acoustic feedback
The power supply is interrupted
The connection between the outdoor station and
the indoor station has been interrupted
The outdoor station needs additional light in order
to be able to display a good image
Your viewing angle to the monitor is unfavourable
There is too much backlighting in the background
Paul-Böhringer-Str. 3
Remedy
Check the power supply
Check the connection and polarity
Use a suitable cable (wire cross section at least 0.65
mm², max. length 50 m)
Place the indoor and the outdoor stations further apart
from each other
Check the power supply
Check the connection and polarity
Arrange additional lighting
Change the mounting height of the indoor station or
adjust the monitor brightness
Install additional lighting or change the installation
location of the outdoor station
Indexa GmbH
74229 Oedheim
Germany
Stand 03/2010
GB - 23