Samsung INDOOR HOUSING SHG-120 Manuel D'installation page 2

Summary
The Indoor Housing (SHG-120) is used for installing the
Smartdome Camera on an outside wall or ceiling.
Precautions Before Installation
•
Make sure that the proposed location can support the combined weights of the Corner
Mounted Adaptor, Wall Mounted Adaptor, Indoor Housing and Smartdome Camera
(about 8 kg).
•
This goods should only be installed by a qualified technician using approved materials
and wiring practices in accordance with national, state, and local electrical code.
Installation
Select a location that will support four times the total
1
weight of the product to be installed.
Depending on the installation location, use the
2
appropriate adaptor.
1. Wall Mounted Adaptor (SADT-100WM): For direct installation on a wall.
2. Ceiling Mounted Adaptor (SADT-100CM): For installation on a ceiling.
1
3. Pole Mounted Adaptor (SADT-100PM): For installation on a cylindrical pole.
• The Wall Mounted Adaptor (SADT-100WM) is also used in conjunction with
the Pole Mounted Adaptor.
4. Corner Mounted Adaptor (SADT-110CM): For installation in the corner of a wall.
• The Wall Mounted Adaptor (SADT-100WM) is also used in conjunction with
the Pole Mounted Adaptor.
Connect the power cable, video-out cable and
3
communications cable to the camera adaptor. (For
details, refer to the Smartdome Camera User's Guide.)
After tidying up the cables, align
4
the lever of the camera
adaptor to the cover top
boss and fasten it to
the cover top using
four screws (M4 8).
X
Boss
Cover Top
Camera Adaptor
Lever
2
GB