Publicité
Les langues disponibles
Les langues disponibles
B.
Uses dipswitches to assign a unit's function : DMX/SLAVE or sound activation, or AUTO mode. For
the unit is DMX mode, set the DMX address. Each dipswitch represents a binary value. See below.
Dipswitch #10 is used to set master or slave mode. Master mode have sound activation and AUTO
mode. Slave mode has DMX and Slave. The unit automatically identifies DMX or SLAVE mode by
data received. Dipswitch #9 is used to set sound activation mode or AUTO mode in master mode.
DMX ADDRESS CALCULATION
In DMX 512 mode, the dipswitch from # 1 to # 9 should be set to record a DMX address. The
address ranges from 1-511. Each dipswitch represents a binary value.
Please refer to the chart below
Each unit has 7 channels. So each product may be receiving a 7-channel DMX address at least. If
you assign an address on 8 channels, the DMX address is: 8*N +1, N=0, 1, 2, 3....
One loop address=1, two loop address=9, three loop address=17, four loop address=25
The dipswitches setting for DMX address see the " DMX Address Quick Reference Chart ".
FUNCTION SETTING
Publicité
