Publicité
Les langues disponibles
Les langues disponibles
Thank you for using our products. For the sake of safety and better operation of this product, please
read this manual carefully before using and operating it.
1. GENERAL INSTRUCTIONS
A.
Thank you for purchasing this product. Please read the user guide for safety and operations
information before using the product. They contain important information about the security of the
facility and on the use and maintenance of equipment.
Keep this manual for future reference. In case of sale of equipment to another user, it is important
that this manual is attached to the equipment to the new user has the necessary information to use
and can read the warnings on safety.
It is essential that the user duly follows the safety instructions and warnings mentioned in that user
manual. The dealer won't be able be responsible for the defaults or any other problems due to the
mishandling from the user and the non following of the instructions included in that user manual.
This product is suitable for creating perfect laser programs and high-quality laser effects.
This unit is designed to produce decorative effect lighting and is used in light show systems.
This product is a so-called show laser emitting radiation with a wavelength spectrum and producing
lasers for shows. Please refer to the safety instructions specific for lasers.
Before any first use, unpack the set and make sure there was no damage during transport. Check
for missing any part supplied with the laser:
-
1 x TWIN LASER GB
-
1 x POWER CABLE
-
1 x USER MANUAL
B.
This fixture must be earthed to in order to comply with the safety regulations and to avoid any
-
electrical shock.
Before using, please be assure that the voltage is appropriate with the information mentioned
-
at the rear panel of the unit. To avoid any shock hazard, do not open or remove the cover.
This unit is designed for indoors use. Do not expose the unit to rain or moisture.
-
The working temperature of the unit is from 18 to 30°C. Do not use it at higher temperature.
-
Do not switch on and off many times to avoid reducing the life duration of the fixture.
-
Do not use the unit for more than 4 hours in order not to decrease the life duration of your
-
fixture.
Always unplug the unit when we do not use it for a long time or before servicing.
-
Do not place metal objects or spill liquids in/over the unit. If it occurs, please disconnect the
-
unit from the mains at once.
Keep the device away from flammable or hot sources.
-
The fixture should be placed in a ventilated area and fixed at 50 cm at least from the walls.
-
Do not cover the ventilation openings as it may result in overheating.
-
Do not use the unit id dusty environment. Please use soft cloth to remove dust that would be
-
place in the external lens. Clean the unit regularly.
Keep away from children or any non qualified persons.
-
UNPACKING
GENERAL SAFETY INSTRUCTIONS
Publicité
