Breguet 8928 Mode D'emploi page 5

8928/8929
R N
"
EINE DE APLES
-
SELF WINDING
Crown with two positions:
The crown has two positions:
1. Neutral position
(manual winding)
2. Time-setting position
" , -
WATCH OFF CENTRED HOUR CHAPTER RING
Starting the watch
Crown in position 1. This position
enables manual winding of the
self-winding movement, meaning
winding by rotating the crown
upwards ( ), about 30 to 35 turns.
Afterwards, when worn on the wrist,
the watch is automatically rewound.
If not worn, it will stop after about 40
hours.
,
Setting the time
Pull the crown out to position 2. Turn
the crown upwards ( ) to move the
hands forwards to the desired time.
For accurate time-setting, ensure that
the last operation was done in a clock-
wise direction. Then push the crown
back to position 1. After this opera-
tion, rotate the crown downwards
( ) to make sure it turns freely.
M