ECG VV 112 Mode D'emploi page 27

A2 + B1 = 250 W, higher air flow intensity
A2 + B2 = 1100W, higher air flow intensity
A2 + B3 = 2200 W, higher air flow intensity
Note: For persons with decoloured, brittle, damaged or fine hair we recommend the use of the lower setting.
For persons with healthy, rough, strong, exotic and resistant hair we recommend, in order to save time
and effort to use the maximum amount of heat, which is created at the highest setting.
Caution: Never use the product in combination with a hair spray or other products in a spray.
CLEANING AND MAINTENANCE
Before any maintenance disconnect the product from the electric grid! Clean the product always on a product
that has fully cooled down!
Sometimes using a small brush remove dust and hair from the air inflow grill. Wipe the product with a damp
(not wet) cloth and dry with a soft dry cloth. Never clean the hair dryer under running water, do not rinse and
do not submerge in water!
Before putting the hair dryer away, always check that it has cooled down, it is clean an dry.
TECHNICAL INFORMATION
Nominal voltage: 220–240 V ~ 50/60 Hz
Nominal input power: 2200 W
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into
plastic recycling containers.
DISPOSAL OF PRODUCTS AT THE END OF LIFETIME
Disposal of electric and electronic equipment (valid in EU member countries and other European
countries with an implemented recycling system)
The represented symbol on the product or package means the product shall not be treated as domestic waste.
Hand over the product to the specified location for recycling electric and electronic equipment. Prevent
negative impacts on human health and the environment by properly recycling your product.
Recycling contributes to preserving natural resources. For more information on the recycling of this product,
refer to your local authority, domestic waste processing organization or store, where you purchased the
product.
This product complies with EU directive requirements on electromagnetic compatibility and
electrical safety.
The instruction manual is available at website www.ecg-electro.eu.
Changes in text and technical parameters reserved.
GB
08/05
27