Yamaha HAIBIKE PW45 Notice Originale D'utilisation page 85

INSTRUMENT AND CONTROL FUNCTIONS
Function
select switch
Function display
2 Function display
The function display can display the following functions.
• Average bicycle speed
• Maximum bicycle speed
• Trip meter
• Odometer
• Remaining assist distance
• Battery capacity (%)
• Cadence
Push the function select switch, the display changes as follows:
Average bicycle speed  Maximum bicycle speed  Trip
meter  Odometer  Remaining assist distance  Bat-
tery capacity (%)  Cadence  Average bicycle speed
You can reset the data for average bicycle speed, maxi-
mum bicycle speed and the trip meter by pressing the
function select switch for 2 seconds or longer.
7 Average bicycle speed
This displays the average bicycle speed (in kilometers per hour
or miles per hour) since it was last reset.
When you turn off the power, the data up to that point will re-
main in the display.
To reset the data for the average bicycle speed, press the
function select switch for 2 seconds or longer when the
average bicycle speed is displayed.
7 Maximum bicycle speed
This displays the maximum bicycle speed (in kilometers
per hour or miles per hour) since it was last reset.
When you turn off the power, the data up to that point will
remain in the display.
To reset the data for the maximum bicycle speed, press
the function select switch for 2 seconds or longer when
the maximum bicycle speed is displayed.
7 Trip meter
This displays the total riding distance (in kilometers or
miles) since it was last reset.
When you turn off the power, the data up to that point will
remain in the display.
To reset the trip meter and begin counting a new total,
press the function select switch for 2 seconds or longer
when the trip meter is displayed.
7 Odometer
This displays the total distance (in kilometers or miles) rid-
den while the power was on.
The odometer cannot be reset.
16
English - 65