Battery Pack And Charging Procedure - Yamaha HAIBIKE PW45 Notice Originale D'utilisation

70 - English

BATTERY PACK AND CHARGING PROCEDURE

Charging plug
Power plug
Battery
capacity
indicator
Charging connector
The battery pack equipped for the Yamaha e-Bike Sys-
Battery charger lamp
tems is a lithium-ion battery. The lithium-ion battery is
lightweight and offers superior capacity. However, it does
have the following characteristics.
• Its performance decreases in extremely hot or cold en-
• It naturally loses its charge.
• It is necessary to use it several times before its perfor-
Charger
display
The battery pack for the Yamaha e-Bike Systems also has
an embedded computer which notifies you of estimated
Battery capacity
residual battery capacity and suspected faults via the bat-
indicator lamp
tery capacity indicator lamp.
By pressing the battery capacity indicator button, you can
display the residual battery capacity for approximately 5
seconds.
See "CHECKING THE RESIDUAL BATTERY CAPACITY"
for the estimate of the residual battery capacity. See
"TROUBLESHOOTING" for information on fault flashing.
Battery capacity
indicator button
vironments.
mance stabilizes.
21