Makita BDF446 Manuel D'instructions page 4

ENGLISH (Original instructions)
1. Red indicator
2. Button
3. Battery cartridge
4. Star mark
5. Switch trigger
6. Lamp
7. Reversing switch lever
8. Speed change lever
9. Adjusting ring
SPECIFICATIONS
Model
Capacities
-1
No load speed (min )
Overall length
Net weight
Rated voltage
• Due to our continuing programme of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
CORDLESS DRIVER DRILL
SAFETY WARNINGS
1. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
2. Hold power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the
operator an electric shock.
3. Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
4
Explanation of general view
10. Graduation
11. Arrow
12. Sleeve
13. Groove
14. Hook
15. Screw
16. Bit holder
17. Bit
18. Limit mark
Steel
Wood
Wood screw
Machine screw
High (2)
Low (1)
ENE034-1
GEA010-1
GEB088-1
19. Rear cover
20. Recessed part
21. Spring
22. Arm
23. Carbon brush cap
24. Hole
25. Carbon brush cap
BDF446
13 mm
38 mm
6 mm x 75 mm
M6
0 - 1,500
0 - 400
192 mm
1.7 kg
D.C. 14.4 V
may contact hidden wiring. Fasteners contacting a
"live" wire may make exposed metal parts of the
power tool "live" and could give the operator an
electric shock.
4. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
5. Hold the tool firmly.
6. Keep hands away from rotating parts.
7. Do not leave the tool running. Operate the tool
only when hand-held.
8. Do not touch the drill bit or the workpiece
immediately after operation; they may be
extremely hot and could burn your skin.
9. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product (gained
from repeated use) replace strict adherence to safety
rules for the subject product. MISUSE or failure to
follow the safety rules stated in this instruction
manual may cause serious personal injury.
BDF456
13 mm
38 mm
10 mm x 89 mm
M6
0 - 1,500
0 - 400
192 mm
1.5 kg (with battery BL1815)
1.7 kg (with battery BL1830)
D.C. 18 V