General Information; Electrical Specifications; After Cleaning - Apex APX390 Mode D'emploi

GENERAL INFORMATION

-
When the appliance has just been started up, condensation can occur in the cold
accessories. Before cleaning, adjust the steam in position 2-3 and depress the trigger for a
few seconds to drain any condensed steam that may be in the hose.
-
Never use the appliance to clean materials that are not heat-resistant.
-
Never leave the steam switch in position 3 for long usage. Position 2 is the standard
setting, it is sufficient for most tasks and consumes less energy.
-
If the soiled area is difficult to clean, it will require more time and more cloths during the
cleaning process.

After Cleaning

Always switch off the heating switch.
-
- Let all the steam escape: the safety/refiller cap will not open otherwise.
Switch the main switch off.
-
Unplug from the outlet
-
Before storing, let the unit cool down completely.
-
If you do not intend to use the appliance for 2 weeks,
-
the unit as described in the "Descaling" instructions above.

ELECTRICAL SPECIFICATIONS

Nominal Voltage
Nominal power po
Steam pressure e
Appliance Specifications
Dimensions:
Height
Width
Length
Pover cord
Body material
Boiler material
No. of switches
Steam adjustments
No water signal
120V 60Hz
170 0 watts
56 psi
10 inches
11inches
17 inches
13 feet
Plastic
304 stainless steel main boiler
2 on the handle, multiple on unit
3 settings on the handle
Indicator light on the unit
26
any remaining water in