Setting Up; How To Fill The Water Tank; How To Connect - Apex APX390 Mode D'emploi

SETTING UP

HOW TO FILL THE TANK WITH WATER
• Place the appliance on
a flat surface.
• Unscrew the safety
cap (Fig.4).
• Fill in the boiler with
water using the water
bottle (Fig.5).
NOTE: The boiler
holds 2 liters.
ATTENTION: Only
fill the boiler with tap
water. Never add
detergents or other
chemical additives.
The "safety cap valve"
has a special self-
locking device that
cannot be opened
when the appliance is
under pressure.

HOW TO CONNECT

Completely unwind the
•
power cord
Plug into
•
grounded outlet
(Fig.6)
ATTENTION
This machine cannot be
used for more than 3 hours
continuously
Fig.4
Fig.5
20
Fig. 6