Steam Nozzle; Round Brushes; Cleaning Brush - Apex APX390 Mode D'emploi

STEAM NOZZLE

(fitting directly
flexible grip or onto the
tubes (Fig. 10)
Insert the accessory into the
handle or onto the tubes
making sure that the locking
tab is correctly inserted in
the corresponding groove.
ROUND BRUSH (Fig.11)
(fitting on the steam nozzle)
- Fit the brush onto the steam
nozzle.
CLEANING BRUSHES
(Fig.12)
- Move the catch (K) on the
brush to the midway posi-
tion "unlock".
- Slide the brush onto the
universal joint (curved).
- Move the catch (K) to the
left, in the "unlock"
position, or to the right, in
the "lock" position.
NOTE:
When the catch (K) is in
the "unlock" position, the
brush on the universal joint
can swivel180º. When in
the "locked" position, the
brush will not move.
EXTENSIONS & TOOLS
Insert the accessory into
the handle or onto the
tubes making sure that the
locking tab is correctly
inserted in the
corresponding groove.
Fig.10
onto the
Fig. 11
Fig. 12
22