Westfalia Automotive 321 540 300 107 Instructions De Montage page 20

15. Unlock the following cables from the 12-pin plug (slot G on the network control unit) and insert
them into the black 3-pin connector housing (on the cable harness):
The orange/brown cable from compartment 7 into compartment 1.
-
The orange/green cable from compartment 8 into compartment 3.
-
16. Insert the individual orange/brown and orange/green cables of the cable set into the now free
compartments 7 and 8 of the 12-pin plug as indicated by the colours.
17. Close the locking mechanism and re-insert the plug into the network control unit.
18. Unlock the following cable from the 16-pin plug (slot E on the network control unit) and insert
it into the white 3-pin connector housing:
The black/red cable from compartment 2 into compartment 2.
-
19. Insert the individual black/red cable of the cable harness into the now free comportment 2 of
the 16-pin plug. Close the locking mechanism.
20. Insert the plug into the network control unit.
21. Fit the now open 3-pin black and white housings together.
22. Open the purple locking mechanism on the fuse carrier (Fig. 1/2) by shifting it. Take the fuse-
protected cable out of compartment 4 and insert it into the 1-pin housing on the cable set.
23. Re-insert the individual black/blue cable of the cable set into comportment 4 of the fuse
carrier.
24. Fit the now open 1-pin housings together.
25. Insert the following cables into the fuse-protected side of the fuse compartment.
The red cable into compartment 43.
-
The red/black cable into compartment 44.
-
The red/blue cable into compartment 45.
-
26. If the fuse compartments 43 - 45 on the vehicle are not equipped with terminal 30, the
supplied cable adapter has to be installed.
Insert the cable ends as follows:
The red cable into the still free slot of fuse 43
-
The red/black cable into the still free slot of fuse 44.
-
The red/blue cable into the still free slot of fuse 45.
-
Connect the triple-wire contact with the free contact of the fuse bridge of fuses 22-27.
27. Insert the supplied 15 A fuses into fuse compartments 43, 44 and 45.
28. For 13-pin trailer socket only:
The functions "Charging lead" and "Charging lead ground" can be retrofitted using the 3-pin
constant plus preparation plug.
20 321 540 391 101 - 005 - 10/07
Installation Instructions:
Electrical System for Towing Hitch
VW Golf A5