Fujitsu LIFEBOOK S751 Mode D'emploi page 40

•
Y
OU SHOULD NEVER LEAVE YOUR
LEFT EMPTY
•
B
E CAREFUL WHEN ALIGNING AND SEATING DEVICES IN THE BAY
DAMAGE THE BAY OR THE DEVICE
CHECK FOR DIRT OR FOREIGN OBJECTS
.
PLACE
Cold-swapping
To cold-swap modular devices in your Flexible Bay follow these easy steps:
1
Close any open files.
2
Shut down your LIFEBOOK notebook.
3
Pull out the Flexible Bay release latch. This
will push your device out slightly, allowing
you to remove it.
4
Slide your device out until it is clear of the
bay. This will require light force.
5
Slide the device you are installing into your
notebook until it clicks into place.
6
It is now safe to turn your notebook back on.
You can now access and use the device.
Your LIFEBOOK notebook will automatically detect the new device and activate it within your system.
The drive letters associated with the device will be created and listed under My Computer and Windows
Explorer.
Hot-swapping
Hot-swapping is provided through the Safely Remove Hardware utility. The icon for the utility appears in
the system tray. Click on the icon and follow the on-screen instructions.
F
LEXIBLE
,
DUST OR FOREIGN MATTER MAY ACCUMULATE INSIDE THE NOTEBOOK
. I
F THE DEVICE DOES NOT MOVE EASILY IN THE BAY
34
B
AY EMPTY WHEN THE NOTEBOOK IS IN OPERATION
. I
F THE FIT IS INCORRECT
. I
T WILL REQUIRE A FIRM PUSH TO LATCH THE DEVICE IN
.
,
YOU MAY
, ,
REMOVE IT
Flexible Bay
Release Latch
Removing/Installing
a device in the
Flexible Bay
. I
F
AND