Switching Off The Hob - Whirlpool ACM 723 Mode D'emploi

Switching the hob On/Off
Touch the On sensor for at least 1 second. The touch control panel switches on, an acoustic signal sounds and the displays light up. If one of the cooking zones is hot, the
characters "H" and "0" alternate on the corresponding display.
To switch off, press the same button until the hob switches off. All the cooking zones are deactivated
i
The hob automatically switches off if no function is selected within 10 seconds of switching on.
Activation and adjusting cooking zones
Button
Power indicator display
Button
Selected cooking zone indication
Cooking zone positioning
After switching the hob on and placing the pot on the chosen cooking zone, adjust the power level using the + button. Upon activation, the display shows level 5. Each cooking
zone has various power levels, adjustable with the +/- buttons, going from "1": min. power level, to "9": max. power level. Some cooking zones have a fast boil function
(Booster), shown on the display with the letter "P".
For quick activation at max. power: with the cooking zone set to 0, touch the - button once.
The cooking zone switches on directly at level 9. If one of the two + or - buttons is kept pressed, the action is repeated every half a second, without having to press repeatedly.
Power limitation
This hob model has a max. power limitation carried out by means of software. Therefore, to activate a cooking zone at a power higher than that allowed, the system emits an
acoustic signal and automatically adjusts the power to the max. permissible.
E.g. Assuming the user has set the following levels, utilising all the permissible power:
If the + button is pressed to increase the power level of the diam. 145 zone, the system emits an acoustic signal and will not increase the power level.
By reducing the power level of one of the other zones, the diam. 145 zone can be adjusted, increasing the power.
Deactivation of cooking zones
Press the "-" button of the cooking zone to be switched off, until bringing the level to "0". The cooking zone can also be switched off by touching the "+" and "-" buttons at the
same time. The cooking zone is deactivated.

Switching off the hob

The hob can be switched off by pressing the button
"H", which remains on if the cooking zone is hot.
The cooking zone switches off and, if the zone is still hot, the letter "H" appears in the circle.
"H" is the residual heat indicator. The hob has such an indicator for each cooking zone; it signals which zones are still hot. When the cooking zone cools down,
the display goes off.
. An acoustic signal sounds and the power level indicators go off, with the possible exception of the residual heat indicator
GB8