Ohio Medical CVR Mode D'emploi page 7

Setting the suction level
6
Figure 6
1. Clamp the connective tubing to occlude the
fitting port

Clamp
7
Figure 7
2. Turn the mode selector switch to I (On).
8
Figure 8
3. Rotate the suction control knob until the vacuum gauge indicates the
required setting.
WARNING ⚠ The regulator fitting port or patient connector must be
occluded when setting the prescribed suction level so
that the patient does not receive higher than required
suction.
6700-0355-000 (Rev. 9) 08/2020

7