Mode Selection - Ohio Medical CVR Mode D'emploi

DISS fitting
3
Figure 3
1. Insert trap into the regulator fitting. Situate the tubing in the desired
position.
2. Turn the DISS wing nut clockwise to engage threads
and tighten (there is no O-ring, so the vacuum seal
depends on a tight connection).

Regulator

Wing nut

Mode Selection

4
Figure 4
2 Mode Continuous
I (On) - Suction can be adjusted with the suction control.
O (Off) - No suction supplied to the patient.
5
Figure 5
3 Mode Continuous
MAX - Maximum, full-line vacuum is supplied to the patient.
Note: Available on Three-mode vacuum regulators ONLY.
6 6700-0355-000 (Rev. 9) 08/2020

