Troubleshooting; Disposal - Imetec H1701 Mode D'emploi

GB
Should one of the problems indicated occur, adopt the proposed solution:
Problem
The filtered water is not
clear
Presence of dark
residues (particles
of activated carbon,
however not dangerous
to human health) in the
jug (6)
The electronic LED (2)
is always off and does
not respond to the user
The product is packaged in recyclable materials. Dispose of it in compliance with the
environmental protection standards.
DISPOSING OF THE FILTERING JUG
Dispose of the jug (6), the pre-filtering container (5) and the lid (1) excluding the electronic
LED (2), considering them as plastic materials.
DISPOSING OF THE FILTERING CARTRIDGE
Dispose of the filtering cartridge (4) considering it as solid urban waste.
13

TROUBLESHOOTING

Possible Cause
The filtering cartridge (4)
has not been activated
correctly
Some parts may not have
been cleaned
The filtering cartridge (4)
has not been activated
correctly
Non-use of the product for
several days has caused
the content inside the
filtering cartridge (4) to dry
The battery is flat
Incorrect use and
maintenance of the lid (1)

DISPOSAL

Solution
Repeat the operations in the
ACTIVATION OF THE FILTERING
CARTRIDGE paragraph
(PRELIMINARY PHASES
BEFORE USE chapter)
Wash the lid (1), the pre-filtering
container (5) and jug (6) again
according to the indications
contained in the PRELIMINARY
PHASES BEFORE USE chapter
Repeat the operations in the
ACTIVATION OF THE FILTERING
CARTRIDGE paragraph
(PRELIMINARY PHASES
BEFORE USE chapter)
Contact the Imetec customer
after-sales service. If in doubt
regarding the time passed
from the last activation of the
filtering cartridge (4), replace it
with a new one.