Analog way V-SCALE Manuel De L'utilisateur page 35

VSL range
COMMAND RESPONSE
COMMANDE RÉPONSE
AUDIO COMMANDS / COMMANDES DU MENU AUDIO
RO AMOD
RC ACH
CONTROLS COMMANDS / COMMANDES DE CONTRÔLE
xU VERU
xI I_
yo OPT
QE EPD
oT OST
yl LOCK
sT STBT
sS STBY
ye EPOS
Y FRES
OTHERS COMMANDS / COMMANDES DIVERSES
yS STO
? DEV
COMMUNICATION COMMANDS / COMMANDES DE COMMUNICATION
ne LANE
nr LANR
ns LANS
na ADIP
nw IPA_
nx IPB_
ny IPC_
nz IPD_
np PORT
nk NTMK
nt TCP
FRAME ALERT COMMANDS / COMMANDES DE FRAME ALERT
fM FAMD
fX FAEX
fR FARC
fA FAAU
fs FASW
fS FAST
Rd = Read only command / Commande de lecture.
NOTE:
COMMAND DESCRIPTION
DESCRIPTION DE LA COMMANDE
Auto follow or breakaway mode.
Audio input selection.
Device version.
Identification number.
Options available.
2:2 pull down correction.
Black delay
Key locking.
Standby delay
Standby mode
Erase memories.
DEFAULT VALUE.
Image parameters storing.
Device type.
Communication port selection
Reset of the LAN parameters.
Store the LAN parameters.
IP address and port selection (for
modification)
First byte of the address selected by the
na command.
Second byte of the address selected by
the na command.
Third byte of the address selected by the
na command.
Forth byte of the address selected by the
na command.
Number of the port (local or remote)
selected by the na command.
Netmask.
Protocol selection.
Frame alert mode
Erasing/storing mode
Frame alert storing status
Automatic frame alert activation
Frame alert activation
Frame alert display status
TYPE
MIN MAX
Rd/Wr 0 1 0 = auto follow
• VSL121 & VSL241:
1 = INPUT #1
Rd/Wr 1 5 4 = INPUT #4
• VSL300:
1= VIDEO
0 65535 Example: 104 = Version 1.4
Rd
0 65535 Value displayed in hexadecimal in the device.
Rd
0 65535 0 = without option.
Rd
Rd/Wr 0 1 0 = off
0 = short
Rd/Wr 0 2
2 = long
Rd/Wr 0 1 0 = unlocks
Rd/Wr 0 1 0 = OFF
Rd/Wr 0 1 0 = standby inactive
Rd/Wr 0 1 1 = erase all memories (automatic reset).
Rd/Wr 0 1 1 = Default value action (automatic reset).
Rd/Wr 0 1 1 = STORE action (automatic reset).
32 = VSL121
0 65535
Rd
40 = VSL300
Rd/Wr 0 1 0 = RS232
Rd/Wr 0 1 1 = reset.
Rd/Wr 0 1 1 = store.
0 = all IP address / ports
1 = IP local address / local port
Rd/Wr 0 3
2 = IP remote address / remote port
3 = IP gateway address.
Rd/Wr 0 255
Rd/Wr 0 255
Rd/Wr 0 255
Rd/Wr 0 255
local port: 10000 to 10999.
Rd/Wr 0 65500
remote port: 0 to 65500.
Value = number of bit to 0 (from right).
example: 2
Rd/Wr 0 24
Rd/Wr 0 1 0 = UDP
0 = normal mode
Rd/Wr 0 3
3 = erasing mode
Rd/Wr 0 1 1 = erasing/storing
0 1 0 = empty memory
Rd
Rd/Wr 0 1 0 = not activate
0 = switch off the frame alert
Rd/Wr 0 1
1 = display the frame alert.
0 = frame alert not displayed.
0 1
Rd
1 = frame alert displayed.
Rd/Wr = Read and write command / Commande de lecture et d'écriture.
APPENDIX A / ANNEXE A
VALUE /VALEUR
DESCRIPTION
1 = breakaway
2 = INPUT #2 3 = INPUT #3
5 = INPUT #5
2 = COMPUTER
1 = auto.
1 = medium
1 = locks
1 = 1 min 255 = 255 min
1 = standby active
33 = VSL241
1 = LAN
255.255.255.252
3 255.255.255.248.............
8 255.255.255.0.............
24 255.0.0.0
1 = TCP
1 = capture mode
1 = frame memorized
1 = activate
PAGE 35