Troubleshooting - Rotel U9903CH Mode D'emploi

 TROUBLESHOOTING
PROBLEM
The ADD WATER
indicator light is on
The ICE FULL indicator
light is on
Ice cubes stick together
The ice making cycle
appears normal but no
ice is being produced
Gebrauchsanweisung ○ Mode d'emploi ○ Istruzioni per l'uso ○ Instruction for use
POSSIBLE CAUSE
There is not enough water in
the tank
There is too much ice in the
basket
The ice making cycle is too long
The water temperature in the
inner tank is too low
Room temperature or water
temperature in inner tank is too
high
The refrigerant may be leaking
A pipe in the cooling system
may be blocked
40
SOLUTION
Turn off the ice maker, fill it with
water, and press the ON/OFF switch
again to restart the unit
Remove ice from the ice basket.
Press and hold the SELECT button
for 5 seconds. The unit could make
ice for 10 cycles even if the ICE FULL
indicator light is on
Turn off the ice maker and restart it
when the ice is melted. Select small
size ice cubes with the next cycle
Replace the water in the reservoir.
The recommended water
temperature is between 10°C and
32°C
The room temperature should be
between 10°C and 40°C while the
water temperature should be
between 10°C-32°C. Change the
water in the reservoir or move the
ice maker to a cooler location
Consult a qualified technician
Consult a qualified technician