Cleaning And Maintenance; Care Instructions; Removing Lime Stone; Cleaning The Water Inlet Sieve - Kenwood Mini 1150 rapid Mode D'emploi

Warning:
Before starting cleaning, maintenance and removal of faults, pull the mains plug out of
the socket and close the water-tap!
Advise:
Remove the detergent drawer for cleaning at regular intervals
• Pull out the drawer.
• Lift the drawer slightly, and remove completely.
• Clean detergent drawer with warm water.
• Remove siphon cover and clean with warm water.
• Clean the filler channel for softener if necessary with a bottle brush and remount
siphon cover.
• When drawer removed check if there is any remaining detergent in the shaft of
the drawer and clean if necessary.
• Clean housing, control panel and loading door with a soft cloth.

Removing lime stone

If you have used the correct amount of detergent, de-scaling should not be necessary.
However, should it be required use corrosion proof de-scaler for washing machines
only.
Cleaning the intake filter on the Mod. Mini 1150 rapid
• Turn off the water and unscrew the intake hose from the machine.
• push the split safety ring sideways out of the union nut and lift the union nut off.
• take the coarse filter out and clean it
• replace the filter, mount the union nut and safety ring.
• Screw the intake hose back on to the tap and check that the connection is
watertight
Cleaning the
intake filter on the Mod. Mini 1160 rapid
• Turn off water tap, and disconnect inlet hose from tap
• Remove the two piece safety ring by pressing sideways, and pull out plug
• Lift off the large sieve for cleaning
• Replace the sieve, and the two piece safety ring
• Connect inlet hose to water tap, and check for leaks.

Cleaning and maintenance

97