Changing The Number Of The Rinse Cycles - Kenwood Mini 1150 rapid Mode D'emploi

Rinse cycles
Whites, coloureds and delicates (P1 / P2):
possible variations: soft water
normal water (10 - 16° dH)
hard water
Hand wash and woollens programme (P3 / P4):
possible variations: normal water (10 - 16° dH)
hard water
In the silk wash programme (P5) are 3 rinse cycles and in the quick wash
programme (P6) are  rinse cycles pre-set and cannot be changed.
How to alter the standard (3) rinse cycles
• Main switch on
• Turn programme selector to "  " position
• Press button and
--> your digital display will show the " - - " symbol flashing.
• Turn programme selector to P1, P, P3 or P4
--> your digital display will show the selected programme (see symbols).
• Press button to increase or decrease the number of rinses required
--> This is indicated by the number of flashing bars on your digital display unit.
• Press button for two seconds, this stores the selected number of rinses in
your machine
--> The bars stop flashing
• Turn programm selector to "  " position
• Select required programme - see P. 86 - 87
Please note that all manual programme alterations are stored in your machines
computer.
These alterations are no longer indicated on the digital display once a standard
programme has been re-selected.
To return to standard programm, re-set and save the programm.
Programme intervention
• You can interrupt the selected rinses before they are stored in your machine by
returning the programme selector to position "  ".
Changing the number of rinse cycles
standard setting: 3 rinse cycles
(0 - 10° dH)
(16° dH and above) 2 - 3 rinse cycles
(16° dH and above) 2 rinse cycles
simultaneously for 3 seconds
4 - 5 rinse cycles
3 - 4 rinse cycles
3 rinse cycles
 rinse cycles
3 rinse cycles
4 rinse cycles
5 rinse cycles
93