Vacation, Storage, And Moving Care; Special Instructions For Steam Models - Kenmore 110.6163 610 Série Guide D'utilisation Et D'entretien

Vacation, storage, and moving care

Steam models only: Install and store your dryer where it
freezing can damage your dryer. If storing or moving your
dryer during freezing weather, winterize it.
Non-Use or Storage Care
be on vacation or not using your dryer for an extended
period of time, you should:
1. Unplug dryer or disconnect power.
2. Clean lint screen. See "Cleaning the Lint Screen."
3.
you are away.
Moving Care
1. Unplug the power supply cord.
2.
3. Gas models only: Disconnect gas supply line pipe and
4. Gas models only: Cap the open fuel supply line.
5.
6. Steam models only: Disconnect the water inlet hose from
faucet, then drain the hose. Transport hose separately.
7. Make sure leveling legs are secure in dryer base.
8. Use tape to secure dryer door.
12
1. Disconnect power.
2. Disconnect wiring from dryer and secure wire ends.
3.
4. Steam models only: Disconnect the water inlet hose from
faucet; then drain the hose. Transport hose separately.
5. Make sure leveling legs are secure in dryer base.
6. Use tape to secure dryer door.
Reinstalling the Dryer
the dryer.
SPECIAL INSTRUCTIONS
FOR STEAM MODELS
Water Inlet Hose
Replace inlet hose and hose screen after 5 years of use
to reduce the risk of hose failure. Periodically inspect and
replace inlet hose if bulges, kinks, cuts, wear, or leaks
are found.
When replacing your inlet hose, record the date
of replacement.
To Winterize the Dryer:
1. Unplug dryer or disconnect power.
2.
3. Disconnect water inlet hose from faucet and drain.
To Use the Dryer Again:
1.
Turn on water faucet.
2. Plug in dryer or reconnect power as described in the
Installation Instructions.