Wrinkle Guard; Cycle Guide - Kenmore 110.6163 610 Série Guide D'utilisation Et D'entretien

CYCLE STATUS LIGHTS
6
The indicator bar on the right side of the control will let you
know what stage of the drying cycle is in process.
Check Lint Screen
The Check Lint Screen indicator light will turn on at
the beginning of a cycle as a reminder to clean the lint
screen. It will stay on until the door is opened or a cycle
Damp
This indicator shows that the load is partially dried
and items that you may wish to hang up or iron while
still damp may be removed.
tumbling the load without heat to cool it down and
reduce wrinkling.
Complete
This will indicate that the selected cycle has ended
and the load may be removed from the dryer. If Wrinkle
Guard™ option has been selected, the dryer may continue
to tumble the load, even if the Complete indicator is lit.
SENSING CYCLES –
dryness level shown is the default dryness setting. This setting can be changed on some cycles and will be retained for future drying with
this cycle. Available options shown in bold are default settings for that cycle.
To get the most energy savings and enhanced fabric care from your dryer, use the Sensing cycles. These cycles measure the drying
performance and results may vary with service voltage less than 240.
Items to Dry: Cycle:
No-iron fabrics, Casual
cottons, perm
press, linens,
synthetics
Lingerie, blouses, Delicates
washable knit
fabrics
Towels and Sanitize*
bedding
Heavyweight items Heavy
such as towels and Duty
jeans
Jackets,
comforters, pillows
Corduroys, work Normal
clothes
* Extended high-heat drying cycle intended to help sanitize items such as sheets and towels. This cycle is not recommended for all
† If loads do not seem as dry as you would like or are drier than you would like, select More Dry or Less Dry next time you dry
a similar load.
6
CYCLE GUIDE – SENSING CYCLES
Dry Temp: Dry Level

Wrinkle Guard™

This indicator will light if the Wrinkle Guard™ option has
been selected and is running. The dryer will periodically
tumble the load for up to 150 minutes after the cycle has
ended.
Check Vent
The Check Vent indicator will light if there is a blocked
7
or until the dryer starts to begin the selected cycle; touch
again to pause a cycle.
† : Available
Options:
Damp Dry Signal
Wrinkle Guard™
Cycle Signal
Damp Dry Signal
Wrinkle Guard™
Cycle Signal
Wrinkle Guard™
Cycle Signal
Damp Dry Signal
Wrinkle Guard™
Cycle Signal
Damp Dry Signal
Wrinkle Guard™
Cycle Signal
Damp Dry Signal
Energy Saver
Wrinkle Guard™
Cycle Signal
Cycle Details:
fabrics. Drying time varies based on
fabric type, load size, and dryness setting.
NOTE: Steam portion of Wrinkle Guard™
Extended high-heat drying cycle intended
to help sanitize items such as bedding and
towels. This cycle is not recommended for
completion; do not interrupt.
NOTE: Steam portion of Wrinkle Guard™
Use for drying large or heavy items.
Use for drying large, bulky items; do not
overfill dryer drum.
Medium to large loads of mixed fabrics
and items.