Connecting The Device To The Power Supply - DOMUS LINE TOUCAN Manuel D'installation

INSTALLATION MANUAL
WARNING:
Safety is guaranteed is these instructions are followed
and therefore they must be kept. Installation may
require the involvement of qualified personnel.
Before proceeding with installation of the device
ensure that the environmental conditions are in
compliance with and suitable for the product
characteristics. Before any operation on the device
disconnect mains power.
INSTALLATION:
- The fixing of the item TOUCAN happens inserting
with pressure the glass into profile's hole.
- Make sure that the thickness of the glass is between
6 and 8mm.

CONNECTING THE DEVICE TO THE POWER SUPPLY

- Connect the device power cable to an appropriate
(check plate data printed on the product label) safe
power supply with stabilised voltage (not included)
with power 10% higher than the total load.
WARNING:
Wiring type Y: if the external flexible cable of this
device is damaged, it must be substituted by the
manufacturer. The LED module and the power cable
are not replaceable, therefore in case of damage the
device must be entirely replaced.
EN
WARRANTY:
The warranty on the device is valid only if powered by
a power supply provided by DOMUS Line. The
warranty's general terms and conditions for this
device are available at www.domusline.com