Dörr DVL-165 Notice D'utilisation page 17

UsagE
1. switch on/off
To turn the DVL LED video light on, slide the on/off power switch (11) to position „ON".
To switch the video light off, slide the on/off switch (11) to position „OFF".
2. Brightness
3. illumination angle
4. Exchanging the diffusor plates
Turn the brightness controller (10) to adjust/dim the brightness.
By tilting and swiveling the mounting foot (3), the illumination angle can be adjusted
variably.
To remove the diffusor plate (17), press down the plate slightly while pulling it out to the
side. To insert the diffusor plate slide the plate into the slot (16) and push in until the diffu-
sor plate clicks into place. Make sure that the grooved edge of the diffuser plate is facing
downwards.
Colour temperature with orange diffusor plate: 2700K (+/-300K)
17