Safety Information - EdilKamin DOUBLE Installation, Usage Et Maintenance

Masquer les pouces Voir aussi pour DOUBLE:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 22
Dear Sir / Madam
Thank you for having chosen DOUBLE.
You are kindly asked to read through this information before using the fireplace in order for you to make use of all its features
in total safety.
In the event of any doubt, a request for spare parts or complaints, you should contact the retailer whom you bought it from,
quoting the details on the manufacturer's sticker and the type of appliance.
The number on the manufacturer's sticker is necessary for identification of the fireplace and this is found in the documentation
enclosed with it and also on the plate fixed on its front.
The documentation in question must be kept for identification.

Safety information

The DOUBLE fireplace is designed to warm up the room/premises where it is placed by means of radiation and movement of
warm air.
The only hazards that can derive from using the fireplace pertain to non-compliance with the installation instructions or if
contact is made with the fire or hot parts (glass, pipes, hot air outlet) or if foreign substances are put in the fireplace.
The only combustible material to be used is firewood.
No flammable products are to be used to clean the smoke flue.
The glass is to be cleaned when COLD and with suitable products (e.g. GlassKamin) and a cloth. Do not clean when hot.
The exhaust pipes and the door reach hot temperatures when the fireplace is used.
Do not place anything which is not heat resistant near the fireplace.
NEVER use combustible liquids to light the fireplace or to rekindle the embers.
Do not obstruct the air ventilation openings in the room where the fireplace is installed, nor the air inlets of the fireplace.
Do not wet the fireplace.
Do not use reducers on the smoke exhaust pipes.
The fireplace must be installed in a place which is suitable against fire hazards and equipped with all that is required for the
fireplace to function properly and safely.
The fireplace must only be calibrated by a qualified dealer (applicable for the V-EWS version). Contact details can be ob-
tained from the retailer or by visiting www.edilkamin.com and clicking on Dealers.
If installation is carried out in Italy, refer to the standard issued by the Italian Organisation for Standardisation: UNI
10683/2005 or subsequent amendments.
In all other countries, please verify the laws and regulations in this regard.
DECLARATION OF CONFORMITY
The undersigned EDILKAMIN S.p.a. with head office headquarters at C.so di Porta Romana 116/a - 20122 Milano - Italy - VAT
IT00192220192
Declares under its own responsability as follows:
The wood fireplaces endowed specified below are in accordance with the 89/106/EEC (Construction Products)
WOOD FIREPLACES, trademark EDILKAMIN, called DOUBLE
Year of manufacture:
Serial number:
The compliance with the 89/106/EEC directive is besides determined by the compliance with the European standard:
UNI EN 13229:2006 as test report 30-6467/3 delivered by:
STROJIRENSKY ZKUSEBNI USTAV, s.p., BRNO, Ceska republika, notified Body 1015
and by documentation delivered to:
STROJIRENSKY ZKUSEBNI USTAV
12
Ref. Data nameplate
Ref. Data nameplate

Publicité

Table des Matières
loading

Table des Matières